ESP32-S2 MCU WiFi Development Board, 240MHz, 2.4 GHz WiFi, LCD pre soldered

ESP32-S2 WiFi Development Board

240 MHz Xtensa single-core 32-bit LX7 microcontroller

For C/C++ SDK, MicroPython, CircuitPython Development

Board Specifications

This is a WiFi development board with compact size, plenty peripheral interfaces, integrated low-power Wi-Fi System-on-Chip (SoC) and mass memory, supporting Raspberry Pi Pico expansion board ecosystem. Equipped with hardware crypto accelerator, RNG, HMAC and Digital Signature module, it can meet the security requirements of the Internet of Things. Multiple low-power operating states to satisfy power requirements in IoT, mobile devices, wearable electronics, smart home and other application scenarios, etc.

ESP32-S2 Standard Ver. key features include:

• Support Raspberry Pi Pico expansion board ecosystem to satisfy creative IoT application development
• Xtensa single-core 32-bit LX7 microprocessor, ESP32-S2FH4, support clock frequency up to 240 MHz
• Integrated 320KB SRAM, 128KB ROM, 8MB PSRAM, 4MB Flash memory
• Support IEEE802.11 b/g/n, on-board 2.4 GHz WiFi ceramic antenna, up to 150 Mbps data transfer rate
• USB-C connector, no more plug orientation problem
• On-chip integrated full-speed USB OTG interface, LCD interface (8-bit serial RGB/8080/6800), TWAI controller (ISO11898-1 compatible), capacitive sensor GPIO, temperature sensor and RMT (TX/RX)
• On-board 1.8A current high efficiency boost/buck DC-DC TPS63000 power supply IC
• Support a variety of low-power operating states for adjusting the optimal balance between communication distance, data rate and power consumption, to meet the power requirements of various application scenarios
• Castellated module allows soldering direct to user-designed carrier boards

ESP32-S2 LCD Ver. key features include:

• All features of the ESP32-S2 Standard Ver.
• On-board 0.96inch 160×80 pixels 65K color IPS LCD display
• On-board single 3.7V lithium battery charge/discharge header, suitable for mobile IoT product design

C/C++, MicroPython, CircuitPython Support

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

240 MHz High Frequency Processor

Xtensa Single-Core 32-Bit LX7 Microprocessor, Up To 240 MHz Frequency

26 × Multi-Function GPIO Pins

Configurable Pin Function, Allows Flexible Development And Integration

ESP32-S2 Standard Ver. Pinout

ESP32-S2 LCD Ver. Pinout

What's On Board

ESP32-S2 LCD Ver. Resources

1. ESP32-S2FH4
   Xtensa single-core 32-bit LX7 microprocessor
2. APS6404L-3SQR-SN
   8MB PSRAM
3. TPS63000DRCR
   high efficiency DC-DC buck-boost chip
4. ETA6096
   high efficiency Lithium battery recharge manager
5. Battery header
   MX1.25 header, for 3.7V Lithium battery charging/discharging

6. WiFi ceramic antenna
7. Pinout
   compatible with Raspberry Pi Pico
8. USB Type-C connector
   for programming, serial printing, etc.
9. BOOT button
   BOOT button, press BOOT and then RESET button to enter download mode
10. RESET button
11. 0.96inch IPS LCD
    160×80 resolution, 65K colors

* for more compatible modules, please check here

Outline Dimensions

Resources & Services

WIKI: ESP32-S2-Pico

Shipping list 

Weight: 0.009 kg

ESP32-S2-LCD-0.96-M

1. ESP32-S2-LCD-0.96-M (LCD Ver. with pinheader) x1