7.3″ Full color E-paper Display with Solid Wood Photo Frame for Raspberry Pi zero

Waveshare RPi Zero PhotoPainter AccE is a 7.3-inch color e-paper display accessory designed for Raspberry Pi Zero / Zero 2 W. It features an 800×480 E Ink Spectra (6-color) panel mounted in a wooden frame, suitable for photo frames, artwork, calendars, and information displays.

The board includes a built-in UPS with battery charging, RTC (DS3231) for scheduled updates, and low power consumption, allowing images to remain visible without continuous power. It supports USB-C power, battery backup, and safe shutdown monitoring. This product is ideal for static or infrequently updated content where a paper-like look and long standby time are required.

7.3inch E6 Full Color E-Paper With Solid Wood Photo Frame For Raspberry Pi Zero, Ultra-long Standby, 800 × 480 Resolution, Batt. Optional

7.3″ Full color E-paper Display. 7.3″ Full color E-paper Display with Solid Wood Photo Frame for Raspberry Pi

• Size7.3″
•  
• Resolution800 × 480
•  
• Viewing Angle>170°
•  
• Display ColorE6 Full Color
• RTC ChipDS3231
•  
• UPSUninterruptible Power
•  
• Display PanelE-paper
•  
• ExperiencePaper-like
• 
  
• Display AdvantageEye Care, No Blue Light
•  
• EnvironmentAmbient Light Required
•  
• Display TypePassively Reflective
•  
• HAT+ Standard Improves Interoperability

Features At A Glance

• Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation
• Supports six primary colors and employ Dithering technology to create vivid and saturated full color images
• No backlight, keeps displaying last content for a long time even when power down
• Onboard high-precision RTC chip for accurate time control
• Simple solid wood photo frame, elegant and beautiful
• Rotatable stand and hook hanger on the back, not limited to usage scenarios
• Open source code, more freedom to customize functions
• Adopts Raspberry Pi HAT+ standard
  • Improves interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
• Onboard UPS circuit
  • I2C bus communication, supports real time monitoring of Batt. voltage, current, power, and remaining capacity, etc.
  • Onboard Batt. protection circuits: over charge/discharge protection, over current protection, and short circuit protection, more safe and stable
  • Onboard charge indicator for monitoring the Batt. operating status

Simple solid wood photo frame

High-quality solid wood frame and white edge, simple and elegant

Multi-functional stand

Stable placement, suitable for multiple scenarios

* for reference only, the Raspberry Pi Zero is NOT included.

Wall-mount hook design

Easy to hang on the wall, more efficient use of space

Supports simultaneous charging and discharging and uninterrupted power supply

It is able to charge the batt. and provide power output at the same time from external power supply. Automatically switch over to batt. output if external power supply is unavailable, keeps the system running without any trouble

Real time monitoring of module operating status

monitoring the batt. voltage, current, power, and remaining capacity via I2C. When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss

More Details

Onboard UPS
Ensures timely data storage during unexpected power loss

Ultra-wide viewing angle
Side viewing is also clear

E-paper display
No blue light & more eye-care

Multi-functional stand
For different scenarios

* for reference only, the Raspberry Pi Zero is NOT included

What's On Board

1. Raspberry Pi 40PIN header
   for connecting to the Raspberry Pi Zero series boards
2. USB Type-C port
   for entire circuit power supply and Batt. charging
3. Power button
   for entire circuit power supply ON/OFF (excluding Batt. charging)
4. Charging indicator
   for indicating Batt. charging status
5. Serial port debugging header
   Adapting Raspberry Pi UART pin header, for controlling the Raspberry Pi without an internet connection
6. Lithium Batt. header
   PH2.0 connector for 3.7V Lithium Batt., supports charging and discharging

7. INA219
   Voltage/current monitor
8. RTC chip
   DS3231 high precision RTC chip
9. RTC Lithium Batt. port
   for rechargeable Lithium Batt. with JST SH1.0 2PIN header (3V)
10. E-paper display interface
11. EEPROM
12. ETA6003
    Batt. charge/discharge chip
13. SCT12A0DHKR
    Voltage boost chip

Minimalist design with modern aesthetics

outline dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/RPi_Zero_PhotoPainter

Shipping list 

Weight: 0.04 kg

* the RTC batt. and 3.7V Lithium batt. are optional.

1. RPi Zero PhotoPainter x1
2.  RTC batt. (2PIN JST connector) and 3.7V 1500mA Lithium batt. x1
3. Screen protective film x1
4. Screws and copper standoffs pack x1
5. CH343 USB UART Board (Type-C) x1
6. Hook hanger (total 2PCS, 1PCS assembled) x1
7. Triangle opening tool x1
8. 3PIN squid cable x1