2inch LCD Display Module, IPS Screen, 240×320 Resolution, SPI Interface
Overview
This is a general LCD display Module, IPS screen, 2inch diagonal, 240×320 resolution, with embedded controller, communicating via SPI interface.
Features
- SPI interface, requires minimum GPIO for controlling
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
- Driver: ST7789
- Interface: SPI
- Display color: RGB, 262K color
- Resolution: 240×320
- Backlight: LED
- Operating voltage: 3.3V
Interface
SYMBOL | DESCRIPTION |
---|---|
VCC | Power (3.3V input) |
GND | Ground |
DIN | SPI data input |
CLK | SPI clock input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
BL | Backlight |
Dimensions
Development Resources
Wiki : www.waveshare.com/wiki/2inch_LCD_Module
Package
Weight: 0.024 kg
- 2inch LCD Module x1
- PH2.0 20cm 8Pin x1