800×480, 7.5inch E-Ink display HAT for Raspberry Pi

800×480, 7.5inch E-Ink display HAT for Raspberry Pi, SPI interface 

Overview

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with an embedded controller, communicating via SPI interface.

Due to the advantages like ultra-low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

• No backlight keeps displaying last content for a long time even when power down
• Ultra-low power consumption, basically power is only required for refreshing
• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

• Operating voltage: 3.3V~5V
• Interface: SPI
• Outline dimension: 170.2mm × 111.2mm
• Display size: 163.2mm × 97.92mm
• Dot pitch: 0.205 × 0.204
• Resolution: 800×480
• Display colour: black, white
• Greyscale: 2
• Full refresh time: 5s
• Refresh power: 38mW(Typ.)
• Standby power: <0.017mW
• Viewing angle: >170°

Revision History

Revision V2 has been released on 2019.11, the resolution is upgraded to 800×480, from 640×384 of V1. The hardware and interface of V2 are compatible with V1, however, the related software should be updated.

Interface

Dimensions

Development Resources

Wiki : www.waveshare.com/wiki/7.5inch_e-Paper_HAT

Package content 

Weight: 0.065 kg

1. 7.5inch e-Paper x1
2. e-Paper Driver HAT x1
3. RPi screws pack (2pcs) x1
4. PH2.0 20cm 8Pin x1

1

2

3

4