EM06-E LTE Cat-6 HAT for Raspberry Pi

  • 1 299 kr

EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS.Supports LTE-A and UMTS/HSPA(+) multi networks. Multi-Constellation H

Produkten är tyvärr slut i lager. :(

Artikelnummer: 1148
Dela

EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS.

Supports LTE-A and UMTS/HSPA(+) multi networks. Multi-Constellation High-Accuracy GNSS, Cloud Platform Communication, LTE-A Networking.

New product contact us for order. 

Features At A Glance

This is an LTE Cat 6 Raspberry Pi communication HAT with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil... By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions.

  • Multi-constellation high-accuracy GNSS positioning: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
  • Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
  • USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed LTE-A communication
  • Standard M.2 B KEY slot, compatible with different core modules: EM06-E, EM06-J, EM06-A series
  • Onboard PWR and RST control pin, enabled via DIP switch, for connecting to external IO to turn on/off or reset the module
  • Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
  • Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
  • High efficiency power supply circuit, up to 3A output current

Module Specifications

DATA RATE
FREQUENCY BAND
TEMPERATURE RANGE
LTE CAT 6
Region / ProviderEMEA / APAC (except Japan and CMCC) / Brazil
Module dimensions42.0 × 30.0 × 2.3 (mm)
Operating temperature-30°C ~ +70°C
Extension temperature-40°C ~ +85°C
LTE-FDDB1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
LTE-TDDB38, B40, B41
2xCAB1+B1, B5, B8, B20, B28;
B3+B3, B5, B7, B8, B20, B28;
B7+B5, B7, B8, B20, B28;
B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
WCDMAB1, B3, B5, B8
GNSSGPS/GLONASS/BeiDou (Compass)/Galileo/QZSS
LTE-FDD300 Mbps (DL) / 50 Mbps (UL)
LTE-TDD226 Mbps (DL) / 28 Mbps (UL)
DC-HSPA+42 Mbps (DL) / 5.76 Mbps (UL)
WCDMA384 Kbps (DL) / 384 Kbps (UL)

Dedicated For IoT/M2M Applications

Supports LTE-A And UMTS/HSPA(+) Multi Networks

Applicable For Countries/Regions Including Europe, The Middle East, Africa, Asia-Pacific, Brazil...

Multi System Support, Easy To Use

Supports Windows / Linux / Android...

Just plug it into USB port, go through some simple configuration, the high speed LTE-A network connection will be ready to use

Connection Examples

For Windows PC Or Jetson Nano Series, Use A USB Cable
For Raspberry Pi 4B/3B+, Or CM4-IO-BASE-A/B, Use The Purpose-Made USB Adapter

connecting with Raspberry Pi 4B

 

connecting with Raspberry Pi 3B+

 

connecting with CM4 IO Base

Multi-Constellation High-Accuracy GNSS

Supports GPS, GLONASS, BeiDou/Compass, Galileo, QZSS

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series And Jetson Nano, Stackable Design For More HATs

* for reference only, please check the Package Content section for exact part list.

High Speed Cooling Fan

Better Heat Dissipation For Both Raspberry Pi And The LTE-A Module

Standard M.2 B KEY Slot

Compatible With EM06-E, EM06-J, EM06-A Series Modules

DATA RATE
FREQUENCY BAND
LTE CAT 6EM06-EEM06-JEM06-A
Region / ProviderEMEA/APAC①/BrazilJapanNorth America/Mexico
Operating temperature-30 °C ~ +70 °C
Extension temperature-40 °C ~ +85 °C
Dimensions42.0 × 30.0 × 2.3 (mm)
Power supply3.135V~4.4V, typical 3.7V
Power consumption50μA @ shutdown
4.1mA @ hibernate, typical
22.1mA @ idle
47μA @ shutdown
3.8mA @ hibernate, typical
19.5mA @ idle
50μA @ shutdown
3.8mA @ hibernate, typical
21.3mA @ idle
LTE-FDDB1, B3, B5, B7, B8, B20, B28, B32②B1, B3, B8, B18, B19, B26, B28B2, B4, B5, B7, B12, B13, B25, B26, B29②, B30, B66
LTE-TDDB38, B40, B41B41B41
2xCAB1+B1, B5, B8, B20, B28;
B3+B3, B5, B7, B8, B20, B28;
B7+B5, B7, B8, B20, B28;
B20+B32②; B38+B38; B40+B40; B41+B41
B1+B1, B8, B18, B19, B26, B28;
B3+B3, B8, B18, B19, B26, B28;
B41+B41
B2+B2, B5, B12, B13, B29②;
B4+B4, B5, B12, B13, B29②;
B7+B5, B7, B12, B26;
B25+B5, B12, B25, B26;
B30+B5, B12, B29②;
B66+B5, B12, B13, B29②, B66;
B41+B41
WCDMAB1, B3, B5, B8B1, B3, B6, B8, B19B2, B4, B5
GNSSGPS / GLONAS S/ BeiDou (Compass) / Galileo / QZSS (configurable)
LTE-FDD300 Mbps (DL); 50 Mbps (UL)
LTE-TDD226 Mbps (DL); 28 Mbps (UL)
DC-HSPA+42 Mbps (DL); 5.76 Mbps (UL)
WCDMA384 kbps (DL); 384 kbps (UL)
① except Japan and CMCC;
② B29/B32 is only used for receiving in LTE-FDD, while only for aux component carrier wave in 2×CA;

Comes with EM06-E module by default, for other modules or hardware customization, feel free to contract us.

Application Examples

LTE-A Wireless Router
Combined with OpenWrt, turns the Raspberry Pi into a LTE-A wireless router, providing WiFi hotspot for smartphones to easily access the LTE-A Network.

 

LTE-A Live Streaming
While mounting an additional camera, it is able to do live streaming on webpage or live platform through ffmpeg video stream.

More Possibilities

Outline Dimensions

Wiki: EM06-E_LTE_Cat-6_HAT

Shipping list

Weight: 0.204 kg

  1. M.2 TO 4G/5G HAT x1
  2. EM06-E x1
  3. Antenna 2pcs x1
  4. IPEX adapter cable 2pcs x1
  5. 2*20PIN pin header x1
  6. Passive GPS antenna x1
  7. Dual plug USB3.0 cable x1
  8. USB3.0 adapter x1
  9. USB2.0 adapter x1
  10. SMA protective cap 2pcs x1
  11. Screws pack x1