10 DOF IMU Sensor, Low Power

36.09 USD

10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your

Artikelnummer: 332

Dela

Information

10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.

Features

MPU9250: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer
- Internal Digital Motion Processing™ (DMP™) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc.
- Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices
BMP280: barometric pressure sensor
- Embedded temperature sensor for temperature compensation
- Comparing with BMP180, it is lower power consumption, and higher performance
You can get the 10 DOF data through I2C interface

Specifications

Power: 3.3V~5.5V (internal voltage regulation with low dropout)
Accelerometer
- Resolution: 16 bit
- Measurement range (configurable): ±2, ±4, ±8, ±16g
- Operating current: 450uA
Gyroscope
- Resolution: 16 bit
- Measurement range (configurable): ±250, ±500, ±1000, ±2000°/sec
- Operating current: 3.2mA
Compass/Magnetometer
- Resolution: 14bit
- Measurement range: ±4800µT
- Operating current: 280uA
Barometric pressure sensor
- Barometric resolution: 0.0016hPa
- Temperature resolution: 0.01°C
- Measurement range: 300~1100hPa (altitude: +9000m ~ -500m)
- Barometric relative accuracy (700hPa~900hPa, 25°C~40°C): ±0.12hPa (±1m)
- Operating current (1Hz update rate, ultra-low power mode): 2.8uA

Interface

PIN NO.	SYMBOL	DESCRIPTION
1	VCC	3.3V~5.5V power supply
2	GND	power ground
3	SDA	I2C data pin
4	SCL	I2C clock pin
5	INT	MPU9250 digital interrupt output
6	FSYNC	MPU9250 frame sync signal

Dimension

Development Resources

Wiki: www.waveshare.com/wiki/10_DOF_IMU_Sensor_(C)

Shipping list

Weight: 0.003 kg

10 DOF IMU Sensor (C) × 1

10 DOF IMU Sensor (D), Inertial Measurement Unit, ICM20948 Onboard, Lower Power Consumption, High Precision

Overview

10 DOF IMU Sensor (D) features the low power ICM20948 onboard, it is good at motion monitoring, as well as detecting/measuring the position, height, and temperature.

This tiny module would be helpful for making your own copter or balancing robot, provides great man-machine interaction.