VisionFive2 RISC-V Single Board Computer

VisionFive2 RISC-V Single Board Computer

226.47 USD

VisionFive 2 is the world’s first high-performance RISC-V single board computer (SBC) with an integrated GPU. Compared with its last generation, VisionFive 2 ha

Article Number: 1230

Information

VisionFive 2 is the world’s first high-performance RISC-V single board computer (SBC) with an integrated GPU. Compared with its last generation, VisionFive 2 has been fully upgraded with significant improvements in the processor work frequency, multimedia processing capabilities, scalability, etc. Its superior performance and reasonable price make VisionFive 2 the best affordable RISC-V development board ever.

VisionFive2 RISC-V Single Board Computer Integrated 3D GPU | Base On Linux

Onboard RV64GC ISA Quad-Core 64-Bit SoC, Operating Frequency Up To 1.5GHz

Version Options

MODEL	MEMORY	WIFI MODULE
VISIONFIVE2 4GB	4GB
VISIONFIVE2 4GB WIFI	4GB	√
VISIONFIVE2 8GB	8GB
VISIONFIVE2 8GB WIFI	8GB	√

Features At A Glance

Onboard RV64GC ISA Quad-core 64-bit SoC, operating frequency up to 1.5GHz
Supports OpenCL 3.0, OpenGL ES 3.2 and Vulkan 1.2
Available in 4GB/8GB LPDDR4 RAM options, and optional wireless module
Multiple onboard interfaces, including M.2 / CSI / DSI / HDMI / eMMC / USB 3.0 / 40PIN GPIO / RJ45 Gigabit Ethernet port / TF card slot, etc
Supports 4K@60fps and H264/H265 multi-stream video decoding, 1080p@30fps and H265 multi-stream video encoding
Onboard 40PIN GPIO header, compatible with Raspberry Pi series boards
Provides wide software compatibility including support for Debian

Specifications

PROCESSOR	StarFive JH7110
CPU	RISC-V U74 Quad-core 64-bit RV64GC ISA SoC With 2MB L2 cache and S7 core, operating frequency up to 1.5GHz
GPU	IMG BXE-4-32 MC1, operating frequency up to 600MHz
MEMORY	Optional 4G/8G Byte LPDDR4
STORAGE	TF card (Not included)
CAMERA	MIPI CSI 2lane 1080p@30fps
DISPLAY	1 × 2-lane MIPI DSI 1080p@30fps 1 × 4-lane MIPI DSI 2K@30fps (Only one DSI port can be used for display at the same time) 1 × HDMI 2.0 4K@30fps, 2K@60fps
USB HOST	4 × USB 3.0 Type-A port
USB DEVICE	1 × USB Device (multiplexed with the USB Type-C port)
NETWORKING	1 × Gigabit Ethernet port (main Ethernet port) 1 × 100/10M Ethernet port
RESET BUTTON	Press the reset button to reboot when in the U-boot mode; Press and hold the reset button for three seconds to reboot after the system boots
BOOT MODE SWITCH	RGPIO_1	RGPIO_0	Boot Mode
	0	0	flash
	0	1	TF Card
	1	0	eMMC
	1	1	UART
DEBUG PIN HEADERS	Multiplex pin 8 and pin 10 (physical address) on the 40PIN header, for UART TX and UART RX functions
USB TYPE-C POWER PORT	Supports Quick Charge input 5V DC (minimum 3A) (up to 30 W) Supports 5~20V fixed voltage input Supports USB Type-C PD 2.0, 9V/2A, 12V/2A, 15V/2A, 20V/2A Supports QC 3.0/2.0 adapter, 9V/2A, 12V/1.5A
OTHER POWER SUPPLY	5V input via 40PIN GPIO header PoE port power input, requires external PoE module
OTHER INTERFACES	40PIN GPIO M.2 M-Key Solid State Drive socket eMMC socket 2PIN Fan header 3.5mm Audio Jack, 4-pole stereo audio jack
DIMENSIONS	100 × 74 × 21mm
COMPLIANCE	RoHS, FCC, CE
RECOMMENDED OPERATING AMBIENT TEMPERATURE	0~50℃ (If the operating temperature of the chip exceeds 85°C, the frequency and voltage of the CPU will be automatically reduced for cooling)

OperatingSystem

Multi-Function

Powerful Performance, Open Source Application Environment, And Rich Software Ecology
More Possibilities For VisonFive 2

Application Examples

Quake 3D

GLMark2

MANE emulator

Run multiple programs simultaneously

40PIN GPIO Header

* All GPIO pins can be multiplexed to support different functions including
SDIO, Audio, DMIC, SPI, I2C, UART, PWM, CAN

Onboard Resources

JH7110
PoE port
Boot mode selection
40Pin GPIO
4GB/8GB LPDDR4 SDRAM
Reboot button
EEPROM
Type-C power port
2-lane MIPI CSI
PMIC
2PIN FAN header
Gigabit Ethernet Chip

Gigabit Ethernet port (main Ethernet port)
100/10M Ethernet port
HDMI 2.0 port
3.5mm Audio Jack
USB 3.0 Ports
4-lane MIPI DSI
USB 3.0 Host chip
2-lane MIPI DSI
eMMC socket
TF card slot
QSPI Flash
M.2 M-Key

Product Show

Dimensions

WIKI: www.waveshare.com/wiki/VisionFive2

Shipping list

Alternativ 1

VisionFive2

Packing and protective case x1
OPTIONS VisionFive2 ×1
OPTIONS WIFI module x1
Screws pack ×1

Alternative 2

VisionFive2 Starter Kit

VisionFive2 basic kit:
VisionFive2 ×1
Screws pack ×1
Packing and protective case x1
WIFI module x1
UART Module ×1
32GB TF Card ×1
Card Reader ×1
3PIN Cable ×1
5V 3A Type-C Power Supply x1

Mer info

High-performance quad-core RISC-V single board computer (SBC) with an integrated 3D GPU

StarFive´s VisionFive 2 is the worlds first high-performance RISC-V single board computer with an integrated GPU.

This new generation has been fully upgraded with significant improvements in processor work frequency, multimedia processing capabilities and scalability. It glances with a quad-core 64bit SoC with RV64GC ISA with a clock rate of up to 1.5GHz. The integrated IMG BXE-4-32 MC1 supports OpenCL 3.0, OpenGL ES 3.2, and Vulkan 1.2 VisionFive2 provides as well a rich set of interfaces like M.2 connector, eMMC socket and many more. ! Please note the expected delivery time for both variants at the bottom of this page. !

Technical Details:

Processor

StarFive JH7110 with RISC-V U74 quad-core with 2 MB L2 cache and S7 monitor core, supporting RV64GC ISA, working up to 1.5 GHz
IMG BXE-4-32 MC1 with work frequency up to 600 MHz (400 MHz by default)

Memory

2GB, 4GB, 8GB LPDDR4 (up to 2800Mbps)

Storage

Onboard TF card slot
Flash

Wireless Connectivity

WiFi dongle (only for WiFi board variants)

Video Output

1 × 2-lane MIPI DSI display port, supporting up to 1080p@30fps
1 × 4-lane MIPI DSI display port, supporting up to 2K@30fps in both single display and dual display modes
1 × HDMI 2.0, supporting up to 4K@30fps or 2K@60fps

Camera

1x 2-lane MIPI CSI camera port, supporting up to 4K (3840 x 2160) pixels @30fps

Encoder/Decoder

Video Decoder supports up to 4K@60fps; Support multi stream for H264/H265
Video encoder supports up to 1080p@30fps and multi-stream for H265
JPEG encoder/decoder

Peripherals

2 x USB 3.0 ports
2 x USB 2.0 ports
40 Pin GPIO Header (28 x GPIO, I2C, I2S, SPI, UART)
2x RJ45 Ethernet Connector
3.5 mm Audio jack (4-pole stereo audio output)
M.2 Connector
eMMC Socket
2 pin fan header
Micro-SD card slot for system boot and data storage
Reset and Power Button

Power Supply

Power 5V DC with PD, up to 30W

Power Connector

USB Type-C port or 40-pin GPIO header

Dimension

100mm x 72 mm

Compliance

RoHS, FCC, CE